-
Probe Type Resistance Thermometer
Temperature Range:-50 ~260°C (-58 ~500°F);Shell Material:Stainless Steel;Minimum shell length:4" (101mm);Maximum shell length:48"(1220mm)(Longer needs to be customized)¥ 0.00Buy now
-
Explosion proof / Flame proof RTD Sensors
Probe: Stainless Steel;Support: Stainless Steel;Top junction box: Copper-free aluminium alloy, 316 stainless steel.;Insulation Resistance: under 100V dc voltage test, Insulation resistance value is not less than 10 m Ω;Connection: No more than AWG14;Thermal response time: The sensing response was 63% in room temperature water flow.¥ 0.00Buy now
-
Bearing Type Resistance Thermometer
Features:Temperature Range:Standard: -50 ~ 260°C(-58 ~ 500°F); Explosion-proof:-50 ~ 200°C(-58 ~ 392°F)Shell Material: Stainless SteelWire: copper stranded conductor + PTFE¥ 0.00Buy now
-
Sheet Metal juction Box-NSEC
Robust Stainless Steel Construction;Softer Finished Rounded Edges;Rigid Slotted External Mounting Feet;Superior One Piece Silicone Sponge Gaskets;Internal/External Earth Stud Fitted;According to customer's requirement provide assembly solution;Hazardous Rating(s): Zone 1, Zone2, Zone21 & Zone22;Temperature Class & Ambients: T6 40C as standard;Optional T5 with ambients up to¥ 0.00Buy now
-
NY Series Linear Pneumatic Actuators
The NY series linear pneumatic actuators represents a broad range of field proven, it suitable for automating most types of rising stem valves in safety shutdown and control applications. The NY actuators are manufactured in accordance with strict quality standards and assure reliability and safety in your specific service. This catalog lists standard models intended to cover a wide range of sizin¥ 0.00Buy now
-
NY Series Actuators
NY Series scotch yoke actuator is designed for the general purpose of valves and damper automation and offer a wide range of torque to operate ball, butterfly, plug valves, dampers or any device that requires a quarter turn operation for on-off or modulating service.NYS series actuators are designed with SYMMETRICAL yoke, so at 0 and 90 degree position of the stroke¥ 0.00Buy now
-
NV series Ball Valve
2 way Stainless steel full port ball valve, 2 pieces; Available Ends: GAS thread (DIN 2999), NPT thread(ANSI B 2.1); Made in AISI 316 (CF8M); Ball seats PTFE + 15 % G.F.;Viton O Ring stem;Stem gasket PTFE;Locking system;Blow-out proof stem;Working pressure: max 63 Kg/cm 2 up to 45°C;For higher temperature refer to diagram;Working Temperature: - 25 ºC +180 ºC¥ 0.00Buy now
-
NSV Solenoid Valve
NSV Series solenoid valves include body-ported and NAMUR two kind of connection type. And there are two options for material of solenoid valves to choose: anodized aluminium or AISI316.Each solenoid valve is field interchangeable for use on either double acting (5-way) or spring return (3-way) actuators and is available in single coil, dual coil, or 3-position configuration (open centers, closed¥ 0.00Buy now
-
NST Series Actuators-TYPE
COMPACT DESIGN: The NSEC rack & pinion stainless steel pneumatic actuator provides linear torque output in a compact design utilizing the same body and end caps for double acting and spring return units.AISI 316: all external components (body, end caps, pinion and fasteners) are made in stainless steel (CF8M or AISI 316) for a superior corrosion resistance.¥ 0.00Buy now
-
NL35-55 Limit Switch-NSEC
NL35 is a very compact limit switch box, thereby allowing maintenance of a smaller valve envelope size.NL35 comes standard with a high visibility beacon, offering clear location of the current valve position.The operating position of the switches can be easily changed by adjusting the high resolution spline cams manually and independently without the need for additional tools.¥ 0.00Buy now
-
NEV Series Solenoid Valves
Explosion-proof:ExdIlCGb T6; Ex tb IIC DblP67according to EN/IEC 60079 ,Satisfy allrelevant EC Directives;Direct & Pilot operated 2 types;Dedicated execution for low power;Coils used in metal enclosure have class H insulationgrade;Good performance in extreme low ambienttemperatures;Enclosure is provided witha 1 /2 NPT threaded entryhole, and M20x1,5 is optional for installatio.¥ 0.00Buy now
-
BNF Series
Resilient-seated butterfly valves have widen their range of applications due to their reliability and advantages compared to traditional ball and globe valves. In particular, the NSEC BNF series are used in different industries both for ON-OFF and flow control service of any type of fluid.¥ 0.00Buy now
-
NT Series Actuators-TYPE
The NSEC rack & pinion pneumatic actuator produces linear torque output in a compact designutilizing the same body and end caps for double acting and spring return units. Namur VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required tomount solenoid valves, limit switches or positioners.The standard angle of rotation is 90°. Additional travel rotations of 120°, 135¥ 0.00Buy now
HOME | INTRODUCE | PRODUCT | COOPERATION | QUALIFICATIONS | PROGRAMME | CONTACT
COPYRIGHT © NORTHWEST SYSTEM ENGINEERING COMPANY CO. LTD. ALL RIGHTS RESERVED